What do you see when you run the following commands from the console (or SSH)?
- vdf -h
- df -h
- ls -lh /dev/disks
Here's an example of a HDD installation (with scratch partition):
~ # vdf -h
~snip~
-----
Ramdisk Size Used Available Use% Mounted on
root 32M 436K 31M 1% --
etc 28M 140K 27M 0% --
tmp 192M 4K 191M 0% --
hostdstats 81M 1M 79M 1% --
~ # df -h
Filesystem Size Used Available Use% Mounted on
VMFS-5 35.0G 971.0M 34.1G 3% /vmfs/volumes/datastore1
vfat 4.0G 5.8M 4.0G 0% /vmfs/volumes/4feba845-02418b29-14d6-000c2976faee
vfat 249.7M 130.1M 119.6M 52% /vmfs/volumes/86d26c76-4e38d309-631a-8844386b0a75
vfat 249.7M 8.0K 249.7M 0% /vmfs/volumes/131d727f-4c64967b-3c43-09ad80b0fe4c
vfat 285.8M 202.0M 83.8M 71% /vmfs/volumes/4feba83e-d4d44475-bb0d-000c2976faee
~ # ls -lh /dev/disks
-rw------- 1 root root 40.0G Jan 1 19:18 mpx.vmhba1:C0:T0:L0
-rw------- 1 root root 4.0M Jan 1 19:18 mpx.vmhba1:C0:T0:L0:1
-rw------- 1 root root 4.0G Jan 1 19:18 mpx.vmhba1:C0:T0:L0:2
-rw------- 1 root root 35.1G Jan 1 19:18 mpx.vmhba1:C0:T0:L0:3
-rw------- 1 root root 250.0M Jan 1 19:18 mpx.vmhba1:C0:T0:L0:5
-rw------- 1 root root 250.0M Jan 1 19:18 mpx.vmhba1:C0:T0:L0:6
-rw------- 1 root root 110.0M Jan 1 19:18 mpx.vmhba1:C0:T0:L0:7
-rw------- 1 root root 286.0M Jan 1 19:18 mpx.vmhba1:C0:T0:L0:8
André